According to various professional interior designers, the best-recommended method to improve shower pressure in your bathroom is by installing ideal showerheads. There are many types of showerheads with contemporary features that help to save water, as well as offering a perfect bathing experience. However, there are those individuals who have just relocated to new homes, and perhaps, they are not in a position to squander more money in renovating their bathrooms.
If you are in that situation or you just lack enough cash to replace your current showerheads, there are alternative solutions to boost water pressure in your shower. It is worth noting, replacing showerheads is not an expensive project compared to overhauling the entire water piping system. During the research for this article, we gathered a few DIY ways to improve water pressure in homes. But, we also advise people to seek assistance from expert shower installers or plumbers to offer professional assistance.
Therefore, here are the 6 ways;
Remove showerhead aerators
Showerhead aerators are typically small units installed to control shower flow by adding air into the water. Though various types of showerheads work differently, basically the aerators may cause low water pressure issue. That is why many homeowners prefer removing the aerators when pressure decreases. Depending on the model of your showerheads, removing and adding back an aerator is a simple task. You can also refer to the manufacturer’s manual so that you can locate where it is positioned.
Clean the showerhead
The components of your showerhead can be clogged by debris, which can reduce water pressure. Some sediments such as salts (from hard water) or grime can accumulate in the showerhead holes over time. And cleaning them is quite simple as long as you have the right tools to do it. However, avoid using abrasive substances that can scratch your showerhead. You can use a pin to de-clog the holes or soak the showerhead in some vinegar solution for a few hours. It is also advisable to inspect the showerheads regularly in order to prevent such sediment buildups.
Remove the flow regulator
Basically, water flow regulators are fitted in almost all modern showerheads in order to conserve water and energy. In some states, it is a requirement by federal regulations to have flow regulators in all showerheads. Even though most recent showerheads will provide a relaxing shower experience, there are a few that do not provide the ideal pressure you may want. So, removing the flow regulator will improve shower pressure instantly. You just need to locate the regulator, and then remove it. If you cannot spot its location, read some posts online about how to remove a showerhead flow regulator.
Repair water leakages
Water leakages may be a major cause of low-pressure shower, especially if they are on the main bathroom water supply pipe. The repair work can be done by a professional plumber, unless you have the right tools and skills to fix the problem. The most common water leakages that can interrupt the shower pressure occur behind a shower wall. This is something you can examine and fix on your own. Also, check if there are inappropriately wrapped or damaged Teflon tapes.
As mentioned earlier, replacing showerheads is cheaper than refurbishing the entire plumbing system. For many homeowners, replacing showerheads is the quickest and easiest way to improve shower pressure. You can browse different types of showerheads and pick the best model with the effective features you want. There are also high-pressure showerheads which can be screwed into place within minutes. According to interior designers, it is wise to choose a style of showerheads that compliments with the rest of your bathroom environment.
Adjust the central shut-off valve
Last but not least, you can check the shut-off valve when the water pressure is low. If it is open half-way, probably it is the cause of low shower pressure. So, turn it all the way. It will also save you a few bucks that could have been used to pay a plumber. A few homeowners do not remember to check their main shut-off valves when water pressure is low. Therefore, it is advisable to check it before you consider replacing showerheads or calling in a plumber.
In conclusion, you do not need to rely on a single method. If one does not work, try the next until you achieve a better water pressure. In case all of them fail to work, you can now think of hiring a professional plumber to assess and fix the problem.